Rockbox Development > New Ports

Phillips Go Gear Vibe /17

(1/3) > >>

ATTIKIT:
 Hey guys as some of you might know my sansa clip V2 broke and I could not find a new one so I got a Philips Go Gear and I am starting to research the FW.I found a verification key in the FW using a hex editor (HxD).Just wanted to say I am going to try to port rockbox to this mp3/mp4 player.Any help is appreciated.

Edit: 4/7/10

The FW is loaded from the FLASH

Edit: 4/9/10

built in memory is  NAND Flash

Edit: 4/27/10


I will scan the PCB when I have time

Edit: 4/28/10

I got the FW files and I will post them here

info.dat


--- Code: ---[FIRMWARE]
FWTYPE=0
MAJORVER=0
MIDVER=6
MINORVER=39

--- End code ---


fwaretoc.dat

--- Code: ---CFG_NUM_FIRMWARE_FILES=6
FILE1_DESCRIPTION=Janus Drive
FILE1_FORMAT_TYPE=2
FILE1_NAME=
FILE1_TAG=11
FILE2_DESCRIPTION=Persistent Data
FILE2_FORMAT_TYPE=2
FILE2_NAME=settings.bin
FILE2_TAG=12
FILE3_DESCRIPTION=Application Image 1
FILE3_FORMAT_TYPE=1
FILE3_NAME=firmware.sb
FILE3_TAG=80
FILE4_DESCRIPTION=Application Image 2
FILE4_FORMAT_TYPE=1
FILE4_NAME=firmware.sb
FILE4_TAG=96
FILE5_DESCRIPTION=Application Image 3
FILE5_FORMAT_TYPE=1
FILE5_NAME=firmware.sb
FILE5_TAG=112
FILE6_DESCRIPTION=Updater
FILE6_FORMAT_TYPE=1
FILE6_NAME=updater.sb
FILE6_TAG=255
--- End code ---

signature.dat

--- Code: --- Philips GoGear Recovery
Philips GoGear Vibe

--- End code ---

Edit: 4/29/10

 I found this in the "STDBSTR.DAT" that is hidden on the player in MSC Mode @ Offset 116204                                  

--- Code: ---...ROCKBO~1/CODECS/WAV64~1.COD.ÿÿÿÿÿÿÿÿÿ
--- End code ---

and this @ Offset 116A01


--- Code: ---...ROCKBO~1/CODECS/COOK~1.COD.ÿÿÿÿÿÿÿÿÿ
--- End code ---

along with many other codecs looks like philips might use your codecs

GoGearVibe:
hey man i found in my Phillips go gear vibe a data file its named:

 Devlcon.fil
i tryed to delete this ,but with the next start it was there again......

what is this???ß

ATTIKIT:
um if its just me then don't expect this for a while because I go to school and work on this in my spare time

szczepan2:
How to get a Philips GoGear Vibe SA1VBE04K/17 to MSC mode? I can test your programmed firmware. Lucky porting.

ATTIKIT:

--- Quote from: szczepan2 on May 24, 2010, 10:17:37 AM ---How to get a Philips GoGear Vibe SA1VBE04K/17 to MSC mode? I can test your programmed firmware. Lucky porting.

--- End quote ---

Go to Settings/PC Conection

and thx wil be a bit longer school is a bitch

Navigation

[0] Message Index

[#] Next page