Thank You for your continued support and contributions!
This should properly shut down all iPod Photo and iPod Colour LCDs:http://drop.io/dreamlayers/asset/rockbox-20348-ipodcolorphoto-lcd-shutdown-zipPlease report "LCD Type:" from the debug menu again. With that build, it can also be 3.Technical info: It seems the Color iPod can have 4 different LCDs. They're detected via two GPIO bits in lcd-color_nano.c. 0 and 2 are the old LCD with an unknown controller and they use the same init, shutdown and update procedures. 1 and 3 are simillar to HD66789R. They have different init and shutdown procedures but they share the same update procedure. Before, both were being reported as type 1. I could further develop this code into the HAVE_LCD_SLEEP feature.
Quote from: dreamlayers on March 18, 2009, 02:02:04 PMThis should properly shut down all iPod Photo and iPod Colour LCDs:http://drop.io/dreamlayers/asset/rockbox-20348-ipodcolorphoto-lcd-shutdown-zipPlease report "LCD Type:" from the debug menu again. With that build, it can also be 3.Technical info: It seems the Color iPod can have 4 different LCDs. They're detected via two GPIO bits in lcd-color_nano.c. 0 and 2 are the old LCD with an unknown controller and they use the same init, shutdown and update procedures. 1 and 3 are simillar to HD66789R. They have different init and shutdown procedures but they share the same update procedure. Before, both were being reported as type 1. I could further develop this code into the HAVE_LCD_SLEEP feature.I actually rolled back the firmware to the latest stable version again (due to the recharging bug which will cause complications once the battery runs dry and I can't turn on the ipod any longer. I'll feel much more comfortable using the latest SVN once that is fixed). Therefore, 3.1 was the version running when I reported the LCD type which was "1". Would it report differently in the most recent build in other words you would need me to re-install the latest firmware again and retrieve the LCD type from that? Also, is the version you uploaded contain a special fix for the LCD issue?
Yup That version you uploaded DID fix the problem but if you still need the information:Hardware rev: 0x00060004LCD Type: 3
Also, did you by any chance happen to overcome the charging issue in that version as well or should I roll it back again (I don't want my battery to run dry with no means of recharging it although I could simply load the apple firmware manually in order to recharge).
Page created in 0.058 seconds with 21 queries.