Welcome to the Rockbox Technical Forums!
I just tried 25811, and still have SD problems: hangs at boot, and doesn't load SD if inserted after booth, this is for several different values for udelay()/sleep(). Reverted to 25791 for now.-e
@Those having uSD problems:Would you please check that your file system is not damaged by running either chkdisk or fsck depending on your OS.If you still have the same symptoms please post the following info;Card ManufacturerCard CapacityCard Speed Class(2,4,6 usually has a small circle around it on your card)I was actually having the problem where boot hangs if the uSD card is present but running fsck cleared that up. And yes the card worked just fine in the OF.Thanks!
on my clipv2, r25799-100503, everything works fine, unless "pitch" function; if modified frequently, it leads to great unstability.
Button light now flashes like crazy while switching tracks
the scroll wheel light flickers while building the database
i'm currently 10 hours into a battery bench on my clip v2/r25799/database enabled/ogg q5. i'll post full results when complete. still 40% battery left so i'm aiming for around 16 hours i think.playback is running fine although cpu frequency has to be boosted. i can barely last 20 minutes without it.edit: i haven't tested this build unboosted but all recent builds have been problematic for me and i have no reason to think the new addition of write support is going to fix that?? absolutely no problems boosted though.
Do you think we could reinstate the Clip+ port as an unstable port, rather than an unusable one?
Quote from: FlynDice on May 04, 2010, 05:35:43 PMIf you still have the same symptoms please post the following info;Card ManufacturerCard CapacityCard Speed Class(2,4,6 usually has a small circle around it on your card)
If you still have the same symptoms please post the following info;Card ManufacturerCard CapacityCard Speed Class(2,4,6 usually has a small circle around it on your card)
Quote from: Jennifur on May 04, 2010, 05:48:59 PMQuote from: FlynDice on May 04, 2010, 05:35:43 PMIf you still have the same symptoms please post the following info;Card ManufacturerCard CapacityCard Speed Class(2,4,6 usually has a small circle around it on your card)Please post the infos of your card
Quote from: marc2003 on May 04, 2010, 03:55:52 PMi'm currently 10 hours into a battery bench on my clip v2/r25799/database enabled/ogg q5. i'll post full results when complete. still 40% battery left so i'm aiming for around 16 hours i think.playback is running fine although cpu frequency has to be boosted. i can barely last 20 minutes without it.edit: i haven't tested this build unboosted but all recent builds have been problematic for me and i have no reason to think the new addition of write support is going to fix that?? absolutely no problems boosted though.It's still not fixed although it is a bit better now (i got 10 hours on Clip+ before it crashed, 2 or 3 hours on Clipv2).Ideally the bench should operate in normal conditions but a bench with the CPU boosted will be nice to have anyway.
do { /* this timeout is the only valid error for this loop*/ if(TIME_AFTER(current_tick, init_timeout)) return -2; /* app_cmd */ send_cmd(drive, SD_APP_CMD, 0, MCI_RESP, &response); /* ACMD41 For v2 cards set HCS bit[30] & send host voltage range to all */ if(!send_cmd(drive, SD_APP_OP_COND, (0x00FF8000 | (sd_v2 ? 1<<30 : 0)), MCI_RESP, &card_info[drive].ocr)) return -3; } while(!(card_info[drive].ocr & (1<<31)) );
Page created in 0.264 seconds with 21 queries.