Thank You for your continued support and contributions!
/* This value is filled in by mkamsboot */originalentry: .word 0.equ AS3525_GPIO1_BASE, 0xC80B0000.equ GPIO1_DATA, (AS3525_GPIO1_BASE+0x0000).equ AS3525_GPIO3_BASE, 0xC80D0000.equ GPIO3_DATA, (AS3525_GPIO3_BASE+0x0000).equ CGU_PERI,0xC80F0014.equ AS3525_I2C_AUDIO_BASE, 0xC8070000.equ SYSTEM_REG, (AS3525_I2C_AUDIO_BASE+0x20) /* enable the GPIO-Clock */ ldr r1, =CGU_PERI ldr r0,[r1] orr r0,r0,#(1<<16) str r0,[r1] /* A delay loop - just to prove we're running */ mov r1, #0x500000 /* Approximately 5 seconds */loop: /* check register */ ldr r2, =GPIO1_DATA ldrb r2, [r2] /* Load GPIOC-Data into r1 */ tst r2, #0x80 /* check if .. is set */ /*cmp r2,#0*/ bne noloop subs r1, r1, #1 bne loop /* Now branch back to the original firmware's entry point */noloop: ldr pc, originalentry
% hachoir-subfile e200pe.bin[+] Start search on 15728640 bytes (15.0 MB)Search: 19.58% -- offset=3080192 (2.9 MB)[+] File at 3812522 size=21872 (21.4 KB): PNG picture: 256x256x8[+] File at 3834394 size=2341 (2341 bytes): PNG picture: 132x32x8[+] File at 3865319 size=52475 (51.2 KB): PNG picture: 256x256x32 (alpha layer)[+] File at 3917794 size=3882 (3882 bytes): PNG picture: 132x32x32 (alpha layer)Search: 53.75% -- offset=8454144 (8.1 MB) -- 2.2 MB/sec -- ETA: 3 sec 111 msSearch: 77.92% -- offset=12255232 (11.7 MB) -- 2.4 MB/sec -- ETA: 1 sec 405 ms[+] End of search -- offset=15728640 (15.0 MB)Total time: 6 sec 223 ms -- global rate: 2.4 MB/sec
Well a big news for today: I got JTAG to work on my M200!!! [...]So what's next? Install the winarm toolkit and try to debug this thing. If I can debug that thing and insert my own instructions, that would make my day (because I could recover my bricked m200 )
Page created in 0.075 seconds with 22 queries.