Thank You for your continued support and contributions!
There is a small flaw in last nights touchscreen patch. Since the "last_btn = btn" ended up inside if(tsc200x_is_pressed()) {} the latest button will be repeated on and on until you press somewhere else and that new button gets repeated on and on. IE the line must be outside the if.
I would really appreciate if you could mail me the tcc7801 datasheet. The link on the forum is dead, or rather Telechips now require a password for the files, and the datasheet is nowhere else to be found.
I tried many times to see if any GPIO pin changed in the "Hardware info" screen, but none did when I inserted/removed the USB cable.
This is the current working link.
Ok, we'll need to monitor the PCF50635 interrupts (this should work in pretty much the same way as the existing code). Also does D23 change when you insert the AC adapter?
Hmm.. It looks like the datasheet for TCC780, not TCC7801. Sure that you got it right?
No idea. An AC adapter wasn't included when I bought my D2+, so I can't test it.
I'll start with trying to replace the TIMER0 interrupt that does current_tick++ 100 times a secondwith the 32 bit timer/counter hw.
Can anyone explain why adc_tick() looks like it does? It looks strange.
Is there any way to rotate the screen (the left of the screen being the top, and the right the bottom) ?I want to display big covers in 240x240 pixels like i did with my gigabeat F, which is not possible with de default display.
Finally a usable firmware - the original firmware really suck I think.. I never had a piece of hardware with such a bad usability. But with Rockbox it just rocks
Tomers - regarding your recent keymap changes, I really don't agree with some of them.In the FM Radio screen the +/- keys could previously be used to adjust volume (their natural usage, consistent with the WPS and also how they're used in the OF). Why did you change this to prev/next?Also in the FM screen, the MENU key would previously open the menu (again the natural, expected function). Now it needs a long-press - why did you do this?You also removed the second ACTION_TREE_WPS line that I only recently added. What was the reason for this?Please can you revert these changes.
Page created in 0.1 seconds with 21 queries.